Range
Cruise 10.0 T with 2 x Power 48-5000
|
Speed in knots (km/h)* |
Range in sm (km)* |
Running time in hours: |
Slow |
4.2 (7.8) |
32,0 (60,0) |
06:00 |
Full throttle |
14,0 (26.5) |
14,0 (26.5) |
01:00 |
* Depends on type of boat, load, propeller and conditions. Speed and range indications do not represent a legal guarantee.
Information on range and speed
For a displacement boat making way through the water, the required propulsive power increases in proportion to the cube of the speed. This means that if you want to double your speed, you need eight times as much power.
And vice-versa, a small reduction in speed is enough to increase the achievable range substantially.
The Torqeedo Cruise's on-board computer calculates the remaining range constantly, by linking the motor's consumption data with the charging level of the batteries, and the speed over the ground from the GPS. This allows you to read the remaining range in real time from the motor display or the smartphone app TorqTrac.
Specifications
Input power in watts |
10,000 |
Propulsive power in watts |
5,600 |
Comparable petrol outboards (propulsive power) |
20 HP |
Comparable petrol outboards (thrust) |
25 HP |
Maximum overall efficiency in % |
56 |
Static thrust in lbs* |
≤ 405 |
Integrated battery |
- |
Nominal voltage |
48 |
Final charging voltage |
- |
Total weight in kg |
60.3 (S) / 61.8 (L) / 63.0 (XL) |
Motor weight without battery in kg |
- |
Weight of integrated battery |
- |
Shaft length in cm |
38.5 (S) / 51.2 (L) / 63.9 (XL) |
Standard propeller v = speed in km/h at p = power in watts |
v22/p10k |
Alternative propeller options |
v32/p10k & v15/p10k |
Propeller Guide |
Maximum propeller speed in rpm |
1,400 |
Control |
Remote throttle |
Steering |
Provision to connect to standard remote steering |
Tilting device |
Electrohydraulic tilt device with overload protection. |
Tilt angle |
+-45° |
Trim device |
Manual, 4-step |
Integrated on-board computer |
Yes |
Stepless forward/reverse drive |
Yes |
* Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust values.